A-A-52136A
7. Clean strainer, draw-off valve, and draw-off tube thoroughly after each use in accordance with the manufacturer’s recommendations.
3.5 Data nameplate. The kettles shall be furnished with a corrosion resistant metal nameplate attached to the kettle in such a manner as to meet the applicable NSF International sanitary requirements for this equipment. The nameplate shall contain-the following information:
Manufacturer’s Name and Address
Model Number
Serial Number
Steam Pressure (Working/Maximum)
Each data nameplate shall be placed s. o that it is readily visible to the operator during normal operating use, and so as to not adversely affect the life and utility of the kettle.
3.6 Workmanship. The finished kettles shall be complete, clean, and free of fabrication marks, scratches, dents, sharp edges, sharp corners, burrs, slivers, or visible evidence of rust. Rivets, when used, shall be tight and the rivet heads and peened ends shall be round and concentric and in full contact with the joined metal surfaces. There shall be no empty rivet holes. Welds shall be clean, continuous, sound, and free of flux, pits, buildups, undercuts, and shall be ground so as to blend with the adjacent surfaces. Spot welds shall be free from pits, burn throughs, and flashes.
4. REGULATORY REQUIREMENTS
4.1 Contractor recovered materials. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. QUALITY ASSURANCE PROVISIONS
5.1 Contractor certification. The contractor shall certify, and maintain substantiating’ evidence, that the product offered meets the salient characteristics and requirements of this Commercial Item Description, conforms to the producer’s own drawings, specifications, standards and quality assurance practices; and is the same product that has been sold in the commercial marketplace for over one year, or is the same product that has successfully been delivered to the Government on a previous contract or purchase order. The Government reserves the right to require
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business