A-A-50035 Ranges, Electric, IndustrialThis commercial item description covers industrial electric ranges and shall consist of an oven section surmounted by a griddle top or a griddle/hot top as specified. The ranges shall be of the following types and grades: Type 1 - Griddle top Grade A - Stainless steel exterior Type II - Griddle/hot top Grade A - Stainless steel exterior Grade B- Stainless steel front- remaining sides and back shall be carbon steel.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7

A-A-50035A

2.6 Finish. The grade A range front, sides, and back shall be stainless steel. The grade B range front shall be stainless steel; the remaining sides and back shall be carbon steel.

2.7 Electrical characteristics. The range shall be wired for 208V, 60 Hz, 3 Ph unless otherwise specified (see. 5.2).

2.8 Standard compliance. The ranges shall comply with UL Standard No. 197 and NSF International Standard No. 4.

2.9 Data nameplate (“Government unique” requirement. The range shall be furnished with a data name plate in accordance with the applicable requirements of MIL-STD-130 except the requirements for; (a) Methods of applying, (b) Identification tags, (c) Information not required, and (d) Optional marking information shall not apply. The data plate shall be made of minimum 20 gauge corrosion-resisting metal and attached to the range by rivets, screws or welding in such a manner as to meet the applicable National Sanitation Foundation sanitary requirements for this equipment. The plate shall contain the following information which shall be stamped, engraved or applied by photosensitive means:

Contract Number

National Stock Number

Procurement Instrument Identification Number

CID Based Part Identification Number (PIN)

Manufacturer’s Name, Address, and Telephone Number

Supplier’s Name, Address, and Telephone Number (List Only if Different from Manufacturer)

Manufacturer’s Model and Serial Number

Government Approved Manual Number

Each plate shall be placed so that it is readily visible to the operator during normal operating use and so as to not adversely affect the life and utility of the ranges.

2.10 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within the tolerances specified using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this commercial item description are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product.