A-A-52192
5. NOTES
5.1 Intended use. The dispensers are for use in feeding lines to dispense carbonated and non-carbonated drinks.
5.2 Ordering data. Acquisition documents should specify the following:
a. Title, number, and date of this commercial item description.
b. Type, Size, class, style, and service of dispenser required (see 1.1).
c. Water supply pressure, if other than specified (see 2. 1.1).
d. When a water pressure regulator is required (see 2. 1.1).
e. When key lock switches are required on dispensers (see 2.1.2).
f. When permanent floor or wall installation is required for style B (see 2.1.3.4).
9. When electrical requirements are other than specified (see 2 .2)
h. The Government approved manual number is to be included on the data name plate when manuals are purchased under the contract (see 2.4).
i. Type Of packaging and packing required (see 4. 1).
5.3 Part identification number (PIN). The PIN’s to be used for items required by this CID are created as follows:
A52192-II-1-3-A-1 (Example of a PIN: A52192-II-1-3-A-1)
A = Designates a Commercial Item Description
A52192 = CID number
II = Type
1 = Size
3 = Class
A = Style
1 = Service
5.4 Sources of documents.
5.4.1 Sources of non-government association documents.
ASHRAE Standard No. 91 - Methods of Testing Pre-Mix and Post-Mix Soft
Drink Vending and Dispensing Equipment, is available from:
American Society of Heating, Refrigerating
and Air-Conditioning Engineers (ASHAAE)
1791 Tullie Circle, NE
Atlanta, GA 30329
ASTM D 3951 - Standard Practice for Commercial Packaging, is available from:
The American Society for Testing and Materials (ASTM)
1916 Race Street
Philadelphia, PA 19103-1187
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business