A-A-52192
2.4 Data nameplate (“Government unique” requirement, (see 5.5). The dispenser shall be furnished with a data name plate in accordance with the applicable requirements of MIL-STD-130 except the requirements for: (a) Methods of applying; (b) Identification tags; (c) Information not required; and (d) Optional marking information, shall not apply. The data name plate shall be metal and mechanically fastened to the dispensers or shall be the permanent stick-on type. The plate shall contain the following information which shall be stamped, engraved, or applied by photosensitive means:
National Stock Number
Procurement Contract Number
Manufacturer’s Name, Address, and Telephone Number
Supplier’s Name, Address, and Telephone Number (when different from Manufacturer)
Size and Manufacturer’s Model and Serial Number
Government Approved Manual Number (when manual is specified, see 5.2)
Each plate shall be placed so that it is readily visible to the operator during normal operating use of the dispenser and so as to not adversely affect the life and utility of the dispenser.
3. QUALITY ASSURANCE PROVISIONS
3.1 Contractor certification. The contractor shall certify, and maintain substantiating evidence, that the product offered meets the salient characteristics and requirement of this Commercial Item Description, and except for those “Government Unique” requirements specified, conform to the producer’s own drawings, specifications, standards, and quality assurance practices, and is the same product offered for sale in the commercial marketplace or that had successfully been delivered to the Government on a previous contract or purchase order. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
3.2 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within specified tolerances using conversion tables contained in the latest revision of FED-STD-376, and all other requirements of this CID are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch-pound units, a request shall be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product.
3.3 Regulatory requirements. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
3.4 Standards compliance. Prior to approval of the first shipment, the contractor shall submit satisfactory evidence to the contracting officer or his authorized representative that the carbonated beverage dispenser conforms to the requirements of those standards specified in 2.3.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business