A-A-52145
adversely affecting performance requirements or exposing supplier’s employees to undue hazards from the recovered materials in accordance with Public Law 94-580 to the maximum extent practicable. The term “recovered materials” means materials which have been collected or removed from solid waste and reprocessed to become a source of raw materials as opposed to virgin raw materials. None of the above shall be interpreted to mean that the use of used or rebuilt products are allowed under this commercial item description unless otherwise specified.
2.7 Workmanship. The finished kettles shall be complete, clean and free of fabrication marks, scratches, dents, sharp edges, sharp corners, burrs, slivers, or visible evidence of rust. Rivets when used, shall be tight and the rivet heads and peened ends shall be round and concentric and in full contact with the joint metal surfaces. There shall be no empty rivet holes. Welds shall be clean, continuous, sound, and free of flux, pits, buildups, undercuts, and shall be ground so as to blend with the adjacent surfaces. Spot welds shall be free from pits, burn throughs, and flashes.
3. QUALITY ASSURANCE
3.1 Certification. The contractor shall certify, and maintain substantiating evidence that the product offered meets the salient characteristics and requirements of this Commercial Item Description, and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices, and is the same product offered for sale in the commercial marketplace or that had successfully been delivered to the Government on a previous contract or purchase order. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
3.2 Compliance. Prior to approval of the first shipment, the contractor shall submit satisfactory evidence to the contracting officer or his authorized representative that the kettle conforms to the applicable requirements of ANSI Z 83.15, ASME Sections IV and VIII, ASTM A240, NSF International Standard No.4, and UL Standard No.197.
3.2.1 American National Standards Institute (ANSI). Acceptable evidence of meeting the applicable requirements of ANSI Z83.15 shall be a photostatic copy of the American Gas Association (AGA) Appliance Certificate; a listing of the kettle, regular and quick disconnect devices and connections in the AGA Directory of Certified Appliances and Accessories.
3.2.2 American Society of Mechanical Engineers (ASME). Acceptable evidence of meeting the applicable requirements of ASME Boiler and Pressure Vessel Code Sections IV an VII shall be the ASME mark.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business