A-A-50496A
4.2 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, provided they fall within specified tolerances using conversion tables contained in the latest version of ASTM SI-10
(IEEE/ASTM SI-10), and all other requirements of this commercial item description including form, fit, and function must be met. If a product is manufactured to metric dimensions and these dimensions exceed the tolerances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product.
4.3 Standards compliance. The coffee makers shall meet the applicable requirements of UL 197 and UL 1082. Acceptable evidence of meeting the requirements of UL 197 and UL 1082 shall be the UL label, UL listing mark, or a certified test report from a nationally recognized independent testing laboratory, stating the coffee makers have been tested and conform to UL 197 and
UL 1082.
5. QUALITY ASSURANCE PROVISIONS.
5.1 Product conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producer's own drawings, specifications, standards, and quality assurance practices and be the same product offered for sale in the commercial market. The government reserves the right to require proof of such conformance.
6. PACKAGING. The preservation, packing, and marking shall be as specified in the contract or order.
7. NOTES.
7.1 Source of documents.
7.1.1 The Federal Acquisition Regulation (FAR) and Code of Federal Regulations may be obtained from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402.
7.1.2 ASTM Standards are available from the American Society for Testing and Materials,
100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
7.1.3 IEEE Standards are available from the Institute of Electrical and Electronic Engineers, Inc., IEEE Service Center, 445 Hoes Lane, P.O. Box 1331, Piscataway, NJ 08855-1331.
7.1.4 UL Standards are available from Underwriters Laboratories, Inc., 333 Pfingsten Road, Northbrook, IL 60062.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business