A-A-52191
5.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of this commercial item description.
b. Size of beverage dispenser required (see 1.2)
c. Dispenser head finish and material, when other than specified (see 2.1).
d. Number of dispensing heads required per dispenser (see 2.1.1).
e. Water supply pressure, if other than 62 psig (see 2. 1.2).
f. When a water pressure regulator is required (see 2.1.2).
g. Length of insulated conduit required per dispenser (see 2. 1.3).
h. Electrical characteristics, if other than specified (see 2.2).
i. The Government approved manual number is to be included on the data name plate when manuals are purchased under the contract (see 2.4).
j. When the operational test is required (see 3.6.2).
k. Type of packing required (see 4.1).
5.3 Part identification number (PIN)-. The PIN’s to be used for items required by this CID are created as follows:
A-52191-1 (Example of PIN: A52191-1)
A = Designates a commercial item description
52191 = CID number
1 = Size (1.1)
5.4 Sources of documents.
5.4.1 Sources of non-govenrment association documents.
ASHRAE Standard No. 91 - Methods of Treating Pre-Mix and Post-Mix Soft Drink Vending and Dispensing Equipment is available from:
American Society of Heating,
Refrigerating and Air-Conditioning Engineers (ASHRAE)
1791 Tullie Circle, NE
Atlanta, GA 30329
ASTM D 3951 - Standard Practice for Commercial Packaging is available from:
The American Society for Testing and Materials (ASTM)
1916 Race Street
Philadelphia, PA 19103-1187
EPA Clean Air Act Amendment 42 USC 7671a(a) , is available from:
Environmental Protection Agency (EPA)
401 M Street, SW
Washington, DC 20460
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business